FAG self-aligning ball bearing seals: both ends with a ring.

Sichuan FAG Bearings: FAG Self-aligning ball bearings
        Editor's Note: Sichuan FAG bearings sales center, in front of those two articles in our understanding of the fag fag angular contact ball bearings and deep groove ball bearing type and the characteristics of their basic properties, the next FAG bearings sales center in Sichuan, we meet at FAG self-aligning ball bearings.
 FAG self-aligning ball bearings Features: It is a spherical outer ring raceway in a double row bearings. Their self-aligning capability of the error can be, shaft deformation and deformation bearing, self-aligning ball bearings can be cylindrical or conical, can not be split.
 FAG self-aligning ball bearing basic types: 12,13,22,23 within the space can be cylindrical or conical, taper 1:12 (suffix K), self-aligning ball bearings can be installed directly into the cone axis line, you can also an adapter sleeve mounted to the cylinder, but also can provide with closures of .112 series aligning ball Stainless steel slewing bearing inner ring is wider, they are inserted through a slot of the inner end of the pin is fixed to the shaft. If the shaft center bearing support by a swap, then this must be stacked in the groove of the bearing arrangement, ie with the bearing inner or outer. Bearing hole tolerance J7.
  FAG self-aligning ball lysn-bearing pair: Self-aligning ball bearings allow shaft bearing center deflection around 4 degrees, sealed self-aligning ball bearings Max does not compensate for 11.5 degrees.
  FAG self-aligning ball bearing cage: glass fiber reinforced poly amine wash cage, working temperature less than 120 degrees Celsius, the ball guided solid brass cage, while paying attention to oil change intervals.
 FAG self-aligning ball bearings allow speed: can be higher than the reference speed, but less than the limit speed, to consider the environmental impact.
 FAG self-aligning ball bearings heat: 150 degrees Celsius at a temperature not higher than the same time to take into account the work cage material.
 FAG self-aligning ball bearing mounting dimensions: Before installing the adapter sleeve aligning ball bearings, we must consider the size of the support ring.
 FAG self-aligning ball bearing suffix: C3 radial clearance than normal clearance, K Tapered bore, M ball guide machined solid brass cage, .2 RS with both ends closures, TV glass fiber reinforced poly amine wash cage