Currently, the use of precision bearings with increasing sophistication

How to use low-noise bearing grease seals
class = MsoNormal> foreign low-noise sealed bearings with grease broadly divided into three categories: low speed bearing grease, general low-noise motor bearing grease, high temperature long life low noise bearing grease.

1 low speed lysn-bearing grease

Currently, the use of precision bearings with increasing sophistication, and promoting the bearing grease used must have the following properties:

(1) has the same Backing bearings operating life, try to extend the maintenance cycle, reduce downtime, improve labor productivity.
(2) In the dn> 5 × 105 to ensure that the motor speed under low temperature, do not dump oil, thereby reducing power consumption to protect the motor.
(3) impurity content is controlled at a certain level below the maximum to reduce device noise pollution to the environment.
(4) in the ultra-low temperature operating conditions to ensure the flexibility of starting and running bearings ensure minimum output power.
2 Universal low-noise motor bearing grease

In the bearing industry, the application of this grease the largest amount of total fat content of 70% with. As these greases selected fiber is soft, easily filtered lithium soap thickener made??, the use of mineral oil as base oil, it is easy to meet lower middle and low bearing vibration requirements. Another advantage is a good pumping, whether mechanical grease, or hand-painted resin, are easy.

Dalian NTN Bearing: NTN new wheel bearings

       Introduction of new products, is a business motivation, we have learned from the Dalian NTN Backing bearings distributor, recently, Japan NTN Bearing Corporation in cooperation with the French SNR NTN developed a new type of wheel backing bearings  the biggest feature is the built-divided into two level switching signal resolution rotation sensor, which can detect a good speed, control ABS and ESC (anti-skid device). Here we follow the Dalian NTN Bearing NTN distributor to learn about this new wheel bearings.

       New wheel bearings NTN working principle and structure:
       New Wheel Hub lysn-bearing NTN works: when the car in case of low and medium-speed, high-resolution signal can be 40 times the original wheel speed detection accuracy. Can be detected by standard vehicle only 1mm movement, control of the vehicle when the best time to be able to control the braking force. In the ABS control for the main purpose of the high speeds, the use of low-resolution signals to reduce the burden of data processing. Development of products high resolution signal output A-phase and B-phase two kinds of pulses, these pulses output by observing the situation, be able to detect the vehicle is moving forward or backward. This can be used to detect whether the start ramp and automatic slip car parking and so on. Wheel speed sensor using a sensor (fixed side) detected at the same intervals on the circumferential direction are alternately magnetized N pole and the S pole magnetic encoder (rotation side) of the magnetic pole changes, as the wheel rotation signal for vehicle control. Reduced rotation signal, which is to improve the resolution, will be able to more finely control the vehicle.

       New Wheel Hub Bearing NTN structure: NTN and SNR using the original magnetic encoder developed a resolution of up to 40 times the original magnetic sensor, and in 2007 developed the magnetic sensors embedded in the "rotation sensor with high resolution hub bearing" . Since high resolution and high speed data processing burden, thus switching the resolution added functionality.

able to charge 10 minutes electricity ran 16 kilometers

SKF's quality and strong knowledge used in electric car motors, machine of its global technical support and product range to see it to ensure a two-year contract to provide specialized products and services to support VenturiFetish electric sports car concept. In addition to supplying SKF lysn-bearing motor reducer and high performance front and rear wheels, but also for its product life prediction techniques and analysis services.
 French Venturi company marketing manager, Phil Berg said: "SKF is a recognized leader in the energy sector has been efficient products and vehicles and motor sport industry, which is an important factor in the French Venturi company SKF as an electric car in the choice of new important partner. Moreover, by SKF and French Venturi company, we will be able to develop new, more sections of SKF Tapered bearing and motor technology. "
 Venturi Fetish groundbreaking environmental concept car is the first zero-emissions of the same type of luxury sports car market due to its development. Car weighing only 1100kg, all-electric housing constructed of carbon and carbon-fiber body aluminum frame. Fetish concept car with 330 horsepower engine effects can be common comparable gasoline engines, each one hundred meters acceleration requires only 4.5 seconds. In addition, Fetish concept car electric car changed in the past ills of life is poor, can travel 350 kilometers on a single charge, the battery charging time is also very fast, able to charge 10 minutes electricity ran 16 kilometers, enough to meet the daily driving needs of the average consumer

FAG self-aligning ball bearing seals: both ends with a ring.

Sichuan FAG Bearings: FAG Self-aligning ball bearings
        Editor's Note: Sichuan FAG bearings sales center, in front of those two articles in our understanding of the fag fag angular contact ball bearings and deep groove ball bearing type and the characteristics of their basic properties, the next FAG bearings sales center in Sichuan, we meet at FAG self-aligning ball bearings.
 FAG self-aligning ball bearings Features: It is a spherical outer ring raceway in a double row bearings. Their self-aligning capability of the error can be, shaft deformation and deformation bearing, self-aligning ball bearings can be cylindrical or conical, can not be split.
 FAG self-aligning ball bearing basic types: 12,13,22,23 within the space can be cylindrical or conical, taper 1:12 (suffix K), self-aligning ball bearings can be installed directly into the cone axis line, you can also an adapter sleeve mounted to the cylinder, but also can provide with closures of .112 series aligning ball Stainless steel slewing bearing inner ring is wider, they are inserted through a slot of the inner end of the pin is fixed to the shaft. If the shaft center bearing support by a swap, then this must be stacked in the groove of the bearing arrangement, ie with the bearing inner or outer. Bearing hole tolerance J7.
  FAG self-aligning ball lysn-bearing pair: Self-aligning ball bearings allow shaft bearing center deflection around 4 degrees, sealed self-aligning ball bearings Max does not compensate for 11.5 degrees.
  FAG self-aligning ball bearing cage: glass fiber reinforced poly amine wash cage, working temperature less than 120 degrees Celsius, the ball guided solid brass cage, while paying attention to oil change intervals.
 FAG self-aligning ball bearings allow speed: can be higher than the reference speed, but less than the limit speed, to consider the environmental impact.
 FAG self-aligning ball bearings heat: 150 degrees Celsius at a temperature not higher than the same time to take into account the work cage material.
 FAG self-aligning ball bearing mounting dimensions: Before installing the adapter sleeve aligning ball bearings, we must consider the size of the support ring.
 FAG self-aligning ball bearing suffix: C3 radial clearance than normal clearance, K Tapered bore, M ball guide machined solid brass cage, .2 RS with both ends closures, TV glass fiber reinforced poly amine wash cage

SKF is committed to promoting bearings

 SKF Solution Focus: wind turbine yaw bearing grease LGBB 2
      According to SKF distributor in China introduced , LGBB 2 grease designed for low-speed , heavy duty, low temperature nuclear vibration condition design . The grease regardless of wind turbines in operation or standby mode can provide lubrication , whether offshore wind Slewing bearing is mounted on or cold areas or far out at sea . LGBB 2 has good waterproof and corrosion resistance , whether in the low starting torque or high temperatures and require high mechanical stability conditions are outstanding performance. Suitable for -40 ° C to 120 ° C temperature range.
 SKF is committed to promoting lysn-bearing , seals and lubrication system design and development, thus improving the cost-effectiveness of wind power . Today's wind turbines are installed in harsh remote environment, the future of wind farms is likely to face more severe conditions . SKF engineers and supporting manufacturers and operators to work together to provide a wide range of specialized solutions to optimize the design of new and existing wind turbine reliability and performance . Reduce the price of SKF bearings , SKF Bearing stock . At the same time , these solutions also help reduce production and maintenance costs per kWh .

SKF forest planting projects to invest in China

 We know that the Swedish SKF Stainless steel slewing bearing Group is very concerned about its impact on the environment, and in 1989 released the first environmental policies. May 21, we learned from SKF bearings distributor in China, SKF and China State Forestry Administration of China signed a framework agreement in remote areas of afforestation. SKF investment through Chinese forest planting projects, hoping the field of environmental protection and social responsibility to contribute to the local community.

       SKF forest planting projects to invest in China held in Beijing, "Sweden and China Innovation Week" kick-off ceremony was held at the signing ceremony, the project is expected to last five years. SKF has been selected forest industry's leading research institutions - the Swedish University of Agricultural Sciences (SLU) as a technology partner.

       SKF Group President and CEO Tom. Johnstone SKF investment in China's forest plantation project signing ceremony, said: "We have always been committed to manufacturing operations to reduce the negative impact on the environment, while providing customers with new environmental value technology, new products and services and we know that the forest in the ecosystem plays a vital role in this project for the sustainable development of our work and beyond zero plan is a favorable support. "

       With environmental and ecological lysn-bearing in SKF's daily operations have always played an important role. SKF in 1989 promulgated the company's environmental policy. SKF is the first to obtain ISO14001 certification of multinational companies worldwide, covering 17 countries, 63 units of departments. China's goal is to 2050 the forest coverage of more than 26%. SKF has a strong sound processes that can continually improve manufacturing operations and production equipment energy efficiency. Therefore, we can greatly reduce carbon dioxide emissions. Over the past four years, reduce carbon dioxide emissions by 27%, a decrease of 150,000 tons.

       SKF China's forest plantation investment projects, aimed at SKF constantly improving environmental performance and as well as to ensure the health and safety of people struggle with. SKF distributor in China editing, please indicate to

SKF state detection equipment to win the 2010 "Best Product" Design Award

       Not long ago, the Design News magazine's 2010 Design News Golden Mousetrap awards in, SKF condition detection equipment won the 2010 "Best Product" Design Award, and awarded the Golden Mousetrap Award for "Best Product" certificate. We follow the SKF lysn-bearing in China, to understand the SKF won the 2010 "Best Product" design award.

       SKF won the 2010 "Best Product" award for product design include: SKF portable instrumentation equipment status, SKF handheld instrument SKF condition monitoring  simplified mechanical testing equipment.

       SKF state detection equipment project manager in this state detection instrument SKF won the 2010 "Best Product" Design Award talked about: "We are delighted to have won" Best Product "design award this honor, this honor is SKF years longer state detection instrument competitiveness certainly, SKF condition detection instrument is a suitable device is just starting out preventive maintenance plan or want to supplement existing condition monitoring. their reading is digital, has established standards or backup data by experienced analysts using SKF instrument for further analysis, as well as SKF100 backed by years of knowledge engineering. "


        Design News magazine has organized Design News Golden Mousetrap Awards for organizing for over 20 years, Golden Mousetrap Award in recognition of the main purpose of the product design and manufacturing engineering innovation efforts. SKF state detection equipment to win the 2010 "Best Product" design award shows SKF Bearing Group engineers a rich imagination and innovation.

2011 Asia International Power Transmission and Control Technology

 Shanghai SKF lysn-bearing Sales Center News - Shanghai 2011 Asia International Power Transmission and Control Technology Exhibition (PTC Asia 2011) 2011年10月25 day --- 28 October 2011 in Shanghai Shanghai New International Expo in Shanghai as scheduled , so as a leading global provider of bearings, seals , mechatronics , services and lubrication systems supplier -SKF Group , during the Expo highlights those products do ? Including SKF sealing solutions tailored turning applied to large-scale wind turbine drive train SKF bearings , SKF Group , and launched a new series of seals.

      2011 Asia International Power Transmission and Control Technology Exhibition (PTC Asia 2011), SKF (SKF) will focus on demonstrating its capacity in the area of the seal and solutions. SKF developed a systematic approach seals in the worldwide test equipment to help customers improve product and system performance. The sealing products and solutions are widely used in industrial drives , machine tools , construction machinery , oil and gas , wind energy , mining , metallurgy, paper and other industries.

      Sealing materials development and selection and design determines the quality is poor, and generally excellent performance differences between the products . SKF fully understand the requirements of modern engineering , have the relevant skills and knowledge , to meet different application needs sealing solutions . So our sealing solutions can be widely used in many industries. In this year's PTC ASIA on , SKF exhibited for industrial drives , machine tools , construction machinery , oil and gas , wind energy and heavy industry solutions. "

extend equipment maintenance cycle , thereby improving productivity.

 Timken's not only the world bearing industry tycoon , also its bearing steel also enjoys worldwide reputation . Timken's bearing steel grit in most industrial applications can minimize the impact . And Timken. DuraSpexx power density range of Backing bearings and Timken bearing series is used Abrasive Timken patented steel surface technology and engineering , in the same working environment lysn-bearing atigue life can be extended to twice the standard bearing and carrying capacity increased 23%. This ensures Abrasive Timken bearings even in the coal mills dust pollution is serious application environment can also be the normal operation of a long time to reduce costly downtime , extend equipment maintenance cycle , thereby improving productivity.

       Timken company in addition to the thermal power industry to provide the above bearings , Timken also provides self-aligning roller bearings , Timken cylindrical roller bearings , Timken tapered roller bearings , Timken spherical thrust bearings and thrust bearings Timken Tapered including a full range of Timken bearings. These products can solve the thermal power industry customers in the gear box , roller and other aspects of the application problem. In addition, Timken solid lubricating bearings in the thermal power industry applications are very broad, such bearings can extend the maintenance cycle , but also can reduce 75% of associated labor and material costs. Mainly used for loading and unloading machines, pumps , shredders , bottom ash machines.

the solution NSK won JSAE outstanding scientific paper award.

JSAE Paper Award for outstanding scientific .1951 by the Japan Society of Automotive Engineers was founded in order to enhance achievements in the field of automotive. NSK to the "temperature on the toroidal CVT transmission analysis" as the theme of the paper better articulated and demonstrated NSK CVT transmissions to improve fuel lysn-bearing point of view, therefore, the solution NSK won JSAE outstanding scientific paper award.

       With the rising fuel efficiency of cars on demand, there is a greater transmission efficiency of large-scale motor vehicle continuously variable backing bearings and a corresponding needs. NSK to the "temperature on the toroidal CVT transmission analysis" as the theme of the paper, the purpose is to help in the calculation and verification of the proposed increase in temperature toroidal CVT transmission with a standard formula for empirical data to help predict toroidal CVT gearbox transmission efficiency more accurately in further improve vehicle fuel efficiency measures thesis literature.

       And NSK Pacific Convention Center in Yokohama, Japan on May 19 to 21 on the Automotive Engineering Exposition held detailing the toroidal CVT transmission, highlighting NSK transmission technologies to improve fuel efficiency. NSK won the 60th JSAE Paper Award is outstanding scientific NSK transmission technology research in the affirmation that we provide will enable NSK NSK Bearings more efficient products and services, as well as a product manufacturer NSK, will further reduce the realization of energy losses contribute to global sustainable development

About Bearings fever causes and solutions

lysn-bearing fever causes and troubleshooting

(1) Reason: low precision bearings
Methods: The specified accuracy class bearings.

(2) Cause: The spindle is bent or housing bore different heart
Methods: Fix spindle or cabinet.

(3) Cause: The bearing housing laps
: Replace worn bearings and related components.

(4) large axial force
Methods: cleaning, alignment ring seals the gap between the requirements of 0.2 ~ 0.3mm, correct impeller balance hole diameter and the checksum static equilibrium values.

(5) Roller bearing damage
: Replace the bearings.

(6) Reason: belt too tight
: Adjust the belt so that proper tightness.

(7) Reason: poor lubrication
Methods: provide grade lubricating material and properly cleaned.

(8) Reason: low quality of assembly
Methods: To improve the quality of assembly.

medium-sized bearings

Large timken backing bearings mounting force required to increase significantly , and should use hydraulic nut and / or using the oiling method :
( 1) When using a hydraulic nut mounting the bearings, it must be positioned on the threaded portion of the journal or a threaded sleeve , so that the annular piston against the bearing inner ring , the shaft nut or ring mounted on the shaft end . Through the oil pump oil into the hydraulic nut to secure , install the required precision of the force, the piston moves in the axial direction . Using hydraulic nuts, spherical roller bearings installed

( 2 ) using the oiling method , oil is injected under high pressure between timken bearing and journal , forming a layer of film . This layer of film will be separated with the surface , significantly reduces the friction between the mating surfaces . Directly mounted to the bearing cone journal , generally use this method, but is also used in France to prepare for oiling tight sets and shift put mounting bearings. Or lubricator pump generates the necessary pressure on the shaft or sleeve grooves and the oil channel , between the mating surfaces of the oil injection . When designing the bearing arrangement , the necessary arrangements must be considered a groove on the shaft and the channel . Spherical roller lysn-bearing with a tank mounted on a withdrawal sleeve , through the oil into the mating surface , and in turn tighten the screws Withdrawal sleeve pressed into the bearing bore .

Large timken bearing mounting force required to increase significantly , and should use hydraulic nut and / or using the oiling method :
( 1) When using a hydraulic nut mounting the bearings, it must be positioned on the threaded portion of the journal or a threaded sleeve , so that the annular piston against the bearing inner ring , the shaft nut or ring mounted on the shaft end . Through the oil pump oil into the hydraulic nut to secure , install the required precision of the force, the piston moves in the axial direction . Using hydraulic nuts, spherical roller bearings installed

( 2 ) using the oiling method , oil is injected under high pressure between timken bearing and journal , forming a layer of film . This layer of film will be separated with the surface , significantly reduces the friction between the mating surfaces . Directly mounted to the bearing cone journal , generally use this method, but is also used in France to prepare for oiling tight sets and shift put mounting bearings. Or lubricator pump generates the necessary pressure on the shaft or sleeve grooves and the oil channel , between the mating surfaces of the oil injection . When designing the bearing arrangement , the necessary arrangements must be considered a groove on the shaft and the channel . Spherical roller bearings with a tank mounted on a withdrawal sleeve , through the oil into the mating surface , and in turn tighten the screws Withdrawal sleeve pressed into the bearing bore .

Bearing Installation Tool TMFT36

Maximum bearing weight: Other parts:
Prevention of premature lysn-bearing failure
Improper installation, typically brutal installed in the early failure of a bearing account for 16%. SKF bearing installation tool
TMFT 36 is designed for quick and accurate installation of the bearing, while the risk of bearing damage during installation drop
To a minimum. Impact ring and sleeve of the rational combination can effectively through the interference fit of the bearing rings
Mounting force to pass in order to minimize damage to bearing raceways and rolling elements of risk. Installation tool sets

There are 36 pieces including impact rings, 3 sleeves and a no rebound hammer, these components are housed in a portable

Toolbox addition for mounting bearings, FMFT36 can also be used to install bushings, seals and pulleys.

Schaeffler in Suzhou Industrial annual dealer meeting held in 2013

The theme of "intensive farming? Total development" Schaeffler Greater China 2013 annual dealer meeting industry located in the beautiful Jinji Lake in Suzhou Intercontinental Hotel was successfully held. Schaeffler AG, member of the Executive Committee, President of Schaeffler Group Industrial Robert? Shulan President (Mr. Robert Schullan), Schaeffler Asia Pacific President and CEO, Greater China Managing Director and Industry Division President Pack Yu Mr Tudor (Mr. Udo Bauer) and other company leaders and hundreds of dealers partners attended the meeting.
Around the "intensive farming? Total development" theme, from Schaeffler headquarters, the Asia-Pacific region as well as the leadership of the Greater China lysn-bearing  evelopment respectively Schaeffler, the current market situation, to face the opportunities and challenges, channel development strategy , dealer management policies as well as the application of new products and technologies such as reseller partners concerns were wonderful keynote speech, and dealer partners raised expectations. In order to jointly cope with challenges of the market, improve the comprehensive competitiveness of dealers, Schaeffler first dealer partners to share the business operations management experience and after-market business development of practical experience.

NSK exhibitors 2010 Beijing China International Exhibition Coal

       Seiko Corporation of Japan (NSK LTD.) On October 26 -29 days participating in the Beijing National Agricultural Exhibition at the 2010 China International Coal Fair, here is the distributor of NSK China's reported.

       2010 China International Exhibition, organized by the State Coal Mine Safety Supervision Bureau, the National Energy Administration, China Coal Industry Association co-sponsored by the State Administration of Production Safety lysn-bearing and Management Center for International Cooperation contractor, the theme was "safe and efficient mining, green carbon use." In addition to showcasing the exhibition changing the mode of development of coal industry's achievements in scientific and technological innovations of coal enterprises, the main show coal production, preparation and processing, mine construction, coal transportation, coal mine safety, geological exploration, coal chemical industry, mine explosion practical aspects of advanced technology and equipment.

       Exhibition 2010 Beijing China International Exhibition Coal origin of the Chinese, the United States, Britain, Japan, Australia and other countries and regions, more than 10 research institutions and numerous famous. As the world's largest bearing manufacturer Seiko Co., Ltd., one of Japan (NSK), also participated in the exhibition.

   

KOYO brand - Lebanon bearing market nova

       KOYO lysn-bearing distributor in China there is news that, Koyo official on January 13, 2011 announced that its KOYO brand re-visit the Lebanese market, it will be a new star in the Lebanese market bearing. Recently, Koyo Corporation in cooperation with ENSO in Lebanon and the Middle East and North Africa, many countries republish koyo brand.

       According to the distributor KOYO China introduced the famous Japanese high-end industrial and automotive brand Koyo has approximately 35 years did not appear in Lebanon, and now its official authorized dealer appointed benevolence, bearing industry with a 50-year-long history of ENSO company republish koyo brand, to re-open KOYO bearings market in Lebanon.

       ENSO company products cover a range of industrial and automotive replacement bearings, including ball bearings, needle roller bearings, spherical bearings, tapered roller bearings, cylindrical roller bearings, cutting-edge technology bearing / for extreme special environment bearings and other more bearing products.

         ENSO company is located in Beirut, Lebanon Lina Ta offices and showrooms official opening ceremony in January 13, 2011 Thursday. ENSO company has specialized skills and capabilities to help customers select the appropriate bearing products, and recommend appropriate spare parts to maintain the normal operation of customer equipment, ENSO KOYO brand company will re-visit the cornerstone of the Lebanese market.

NSK planned to expand production and sales in China

       NSK bearings distributor in China, according to official reports, bearing brand in Japan, as the Japanese avant-NSK Bearing NSK Ltd. (NSK LTD.) Recently decided to expand production and sales business in China to meet its development needs in the Chinese market.

       NSK To keep up with the pace of China's rapid economic growth, with local staff as the center is developing a new strategy - to 2016 NSK sales in China will be doubled. NSK has plans to expand production and sales plans in China are as follows:
      1 January next year, the Japanese Seiko NSK heavy industry base in northeast Shenyang, Shenyang NSK lysn-bearing  new factory started production, also plans to increase investment and equipment, so that production capacity doubled.
      2.2012 operation began in August Hefei new plant to increase investment in equipment, NSK Bearings sales center in Hefei inland plant capacity enhancement in the supply Chinese customers, but also to consider the Japanese automobile manufacturers to provide bearings.
      3 Seiko will be located in the existing coastal and southern China 18 sales outlets, based on additional sales turnover in the inland area stores, plans 2 to 30 years after the marketing point.

Schaeffler Group grace supported debt

 FAG lysn-bearing distributor in China Analysis: Schaeffler Group during the financial crisis of this period, due to the acquisition of Continental wrong decisions, resulting in the family business to become a victim of the financial crisis. We learned from the headquarters in Germany FAG bearings, Schaeffler Group, who is currently the Schaeffler Group's creditor banks to give loans for debt can relax its duration, but can also Schaeffler Group (fag) within a specified period in the last few days for the six-month bridge loan of five hundred million euros.
 Although Schaeffler Group can breathe, but the Schaeffler Group's debt owed ​​to banks has reached 12 billion euros, a single monthly interest payments as high as 70 million euros, which is the whole group a devastating impact on the performance of . It is said that the reason given Schaeffler Group creditor banks repay the grace period is to preserve the Schaeffler family last little face. Banks believe that a workable debt restructuring plan is essential anyway. As for the Schaeffler Group and Continental tire company should be separated or how to separate is being weighed by creditor banks, whether because of their merger synergies and cost savings are always questionable.
  Currently, the Group is now an urgent need 6 billion euros of funds used to repay bank debt and supplement liquidity, or pledged to the creditor banks Schaeffler family's stake may be lost, causing the family to lose control of the entire group. Not long ago, the Schaeffler Group has formally apply to the state aid, but so far still no below.

SKF Group strategic access to global vibration monitoring equipment Leadership Award

  Sweden SKF Bearing Group from global teleconference on SKF bearings distributor in China, that since SKF Group vibration monitoring equipment strategy to help customers reduce operating costs and achieve a better return on investment, so the SKF Group strategic access to global vibration monitoring equipment Leadership Award (Frost & Sullivan Award).
 SKF Group strategic access to global vibration monitoring equipment Leadership Award highlights the SKF Group's innovation strategy vibration monitoring equipment has been recognized by customers, and vibration monitoring equipment SKF global strategy ahead of all its competitors in the same industry, truly create value for customers .
 Frost & Sullivan Analysis Division in the SKF Group strategic access to global vibration monitoring equipment Leadership Award talked about: "In this increasingly competitive vibration monitoring equipment industry, SKF Bearings Group, through its high-quality products and reliability vibration monitoring equipment system to meet customer needs and create a final value for the customer, is a pioneer in this industry. "
 SKF Dan Bradley Branch President SKF Group strategic access to global vibration monitoring equipment Leadership Award talked about: "We are very pleased to have received global vibration monitoring equipment strategy Leadership Award, SKF vibration monitoring equipment for global strategy to provide customers with a complete solution and SKF through our efforts towards a reliable system to help customers reduce overall operating costs, improve production efficiency and profitability.
Global SKF SKF vibration monitoring equipment system is part of the Department of Global Services. SKF vibration monitoring equipment global strategy to provide customers with a full range of lysn-bearing and related products and services to help end users extend machine life and reduce overall maintenance costs SKF bearings price, creating use of advanced technology and reliability of the maintenance and management of integrated solutions improve plant efficiency.

SKF bearing factory opening Russian Railways

        Yesterday, Tver in Russia for the production of railway bearings SKF factory opening, mainly for the Russian Railways to provide railway bearings and ancillary facilities, SKF bearing factory opening Russian Railways will further strengthen and consolidate the Russian Railway Bureau SKF supplier status Here are SKF lysn-bearing distributor in China reported.

       SKF bearing factory Russian Railways invested approximately $ 235 million kronor, which employs about 100 people, mainly for the production of a new generation of SKF SKF seals and (CTBU) Series compact tapered bearing lubrication, the SKF Bearing (CTBU) series bearings are mainly for railways, automobiles and other vehicles, is expected annual output of 1.5 million sets of bearing units. It is reported that Russian Railways for SKF bearings factory opening more perfect, also on July 7 in Moscow established the Global twelfth SKF Solution Factory, that the railway sector to provide more services.

       SKF Railway Bearing Factory in Russia Russian first LEED-certified facility, become an internationally recognized sustainable environmental design standards, 90% of the plant facilities using natural sunlight, use 40% less energy, is the most modern words the world railway bearing factories.

       SKF President and CEO Tom Johnstone • Russian Railways in SKF bearings factory opening comes: "SKF bearing factory Russian Railways opened, so that our customers by significantly reducing life cycle costs and maintenance cycle, while indicates that our BeyondZero ® strategy, seek out and develop business with minimal impact on the environment. Additionally, SKF bearing factory opening Russian Railways, will support our sales growth in Russia and to strengthen the global railway market leadership. "