1, surface cleaning: cleaning must be in accordance with the nature of the surface rust and the prevailing conditions, the appropriate method is selected. Commonly used solvent cleaning, bearings for sendzimir mills chemical treatment and mechanical cleaning method to clean.
2, Luoyang bearing the surface was cleaned by washing by filtration and dried in the drying compressed air, or a dryer 120 ~ 170 ℃ is dried, dry clean gauze can also be used.
Second, anti-rust oil coating method:
1, soak method: Soak in some small items using anti-rust oil, allowed a layer of rust on the surface adhesion method grease. The film thickness can be achieved by controlling the temperature or viscosity rust preventive oil.
2, brush or spray for NA immersion outdoor construction equipment or special shape products, Thin section bearing should pay attention when brushing does not produce accumulation, but also pay attention coated to prevent leakage.
3, spray some large rust-proof material coated with oil immersion method can not be used, Luoyang bearing usually with about 0.7Mpa pressure spraying compressed air filter in the air cleaner place. Spray application of anti-rust oil or solvent dilution thin rust oil, but it must be used to improve fire safety and labor protection measures.
没有评论:
发表评论