lysn china bearings first step in the eccentric eccentric condoms

mounted eccentric . The first step in the eccentric eccentric condoms bearing sleeve and hand direction along the axis of rotation and tighten . Then insert or withstand small iron bar sink hole eccentric sleeve . Hand along the axis of rotation direction of the hammer lysn cylindrical roller bearing hitting the small iron bar . The eccentric sleeve securely installed , and finally locking hex screw eccentric sleeve .
fixed bearing bolts do not tighten the outer jacket to make with spherical bearings in the bearing seat can rotate . Then bearing bolt is good. Also installed the other end of the same shaft bearings and the seat of the shaft a few times , so that the bearing itself automatically find the positive position .
in the lysn backing bearing  with lubricant topcoat , the bearing into the bearing Then the assembled bearing and housing units along the shaft . Pushed to the desired position for installation. Technical points with Block Spherical Bearing to the outer shaft before installation with spherical bearings , you must unplug the fixed pin bearing jacket , while the journal surface clean and smooth polished and coated rust and lubricating oil in the journal at ( allows the bearing on the shaft there are slightly rotated ) .
These are small as techniques and precautions installed outside your summary LNSERTED bearing.